Controls And Indicators; Front Panel And Main Display - Alaris IVAC P6000 Mk II Mode D'emploi

MAIN DISPLAY - This indicates the
infusion rate, volume
volume to be infused (VTBI) and
alarm prompts.
START Button - Press to
start the infusion.
STOP Button - Press to
stop the infusion. The
Amber light will flash to
indicate an alarm.
AC POWER -
illuminated the unit
connected to AC power
and the internal battery is
being charged.
BATTERY - When illuminated the
pump is running on the internal
battery. When flashing the battery
power is low, less than 30 minutes of
use remains.
Use "Double Chevron" for fast increase / decrease and
the "Single Chevron" for slower increase / decrease of
values shown on the display in set-up and configuration.
Are also referred to as the rate keys.
Pump Status
Infusion Rate
Volume Infused
6001FAOPT71 ISS 8
infused,
Press PURGE/BOLUS to purge
the extension line during set up
while the pump is stopped or to
bolus at an accelerated rate while
an infusion is running.
When
is
Syringe Type Fitted
Volume Option

Controls and Indicators

PRESSURE - Use the
PRESSURE button to
display the pumping
pressure.
Use "Blank Soft Keys" in
conjunction with
prompts shown on the
display.

Front Panel and Main Display

Getting Started
OPTION button
Press the OPTIONS
button to
drug name and other
optional features.
ON/OFF - Press once
the
to switch the pump
ON. Press and hold
down for 3 seconds to
switch the pump OFF.
Time
Pressure Icon
VTBI Status
VTBI Option
3 / 99
-
access