Clock Set - Alaris IVAC P6000 Mk II Mode D'emploi

Configured Options

Clock Set

Clock Set is used to set the pumps internal clock.
1. Press the ON/OFF power button to the
OFF position
2. Hold down the START button and press
the ON/OFF button.
3. The main display will show "000". Enter the
Access Code "251" using the rate selection
arrows.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press the OK softkey indicated on the
screen.
6. Select CLOCK SET using the chevron
keys and press the OK softkey indicated
on the screen.
7. To adjust the value displayed use the
chevron keys.
8. When the displayed value is correct press
the NEXT softkey to access the next field.
9. Repeat the process until the correct time
and date is displayed. Press the OK
softkey to store the values.
20 / 99
6001FAOPT71 ISS 8