General Options - Alaris IVAC P6000 Mk II Mode D'emploi

Configured Options

General Options

1. Press the ON/OFF power button to the
OFF position
2. Hold down the START button and press
the ON/OFF button.
3. The main display will show "000". Enter the
Access Code "251" using the rate selection
arrows.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press the OK softkey indicated on the
screen.
6. Select GENERAL OPTIONS using the
chevron keys and press the OK softkey
indicated on the screen.
7. Select the option
enable/disable or adjust and press the
MODIFY softkey indicated on the screen.
8. When all the options that you require to
enable/disable
selected press the OK softkey indicated on
the screen.
9. When the set-up is complete, turn the
pump OFF and return the pump into
service, or
configuration option.
18 / 99
you wish
or adjust have
select the
to
been
next
6001FAOPT71 ISS 8