Configured Options; Drug Name Set Up - Alaris IVAC P6000 Mk II Mode D'emploi

A full list of access codes can be found in the technical service manual.
This option is used to set up a list of drug names.
6001FAOPT71 ISS 8

Configured Options

1. Press the ON/OFF power button to the
OFF position
2. Hold down the START button and press
the ON/OFF button.
3. The main display will show "000". Enter the
Access Code "251" using the chevron.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press OK softkey indicated on the screen.
6. Select the DRUG SETUP option using the
chevron keys and press the OK softkey
indicated on the screen.
7. Select the required drug and press the OK
softkey.
8. To use a drug it must be enabled. Press the
YES softkey indicated on the screen, to
enable the selected drug.
9. To add or change a drug name use the
chevron keys to toggle through the
alphabet, to select a letter press the NEXT
softkey, on completion press the OK
softkey indicated on the screen.
10. When the set-up is complete, turn the
pump OFF and return the pump into
service, or
configuration option.
Drug Set-up
select the next
17 / 99