EUROM Coolsmart 90 Manuel D'utilisation page 82

Stopping the air conditioner 2 hours after setting and
restarting it 10 hours after setting
TIMER OFF-TIMER ON (ON-OFF-start)
1. Press the TIMER OFF button.
2. Press on the TIMER OFF button again to show '2.0h' on
the display.
3. Press the TIMER ON button.
4. Press on the TIMER ON button again to show '10h' on
the display.
5. Wait approximately 3 seconds and the digital display
will show the temperature again. The function is now
activated.
Starting the air conditioner 2 hours after setting and
stopping it 5 hours after setting
TIMER OFF-TIMER ON (ON-OFF-stop)
1. Press the TIMER ON button.
2. Press on the TIMER ON button again to show '2.0h' on
the display.
3. Press the TIMER OFF button.
4. Press on the TIMER OFF button again to show '5.0h' on
the display.
5. Wait approximately 3 seconds and the digital display
will show the temperature again. The function is now
activated.
Economy/Sleep (Eco) operation
The SLEEP function is used to reduce energy consumption
while you sleep. After all, you don't need the same
temperature to feel comfortable. This function can only be
used in the COOL and AUTO modes.
Press on the SLEEP button when you go to sleep. After 30
minutes, the set temperature will increase by 1°C. And
after 30 more minutes, it will increase again by 1°C. The
appliance will maintain this newly set temperature for 7
hours and afterwards the air conditioner will work
according to the original programmed setting.
LOCK button
Use this button when you want to avoid that all the settings will accidentally change.
A lock symbol will appear on the display when the button is pressed. If you press
again, the LOCK function will be disabled.
82