EUROM Coolsmart 90 Manuel D'utilisation page 78

LED display remote control
A. Mode indication
B. Remote control is busy sending
data
C. Temperature / Timer indication
D. ON /OFF indication
E. Fan mode indication
F. Fan speed indication
G. Time indication
H. Lock indication
 Using the buttons
Auto operation
1. Press on the MODE button to select auto.
2. Press on TEMP
temperature.
3. Press on the ON/OFF button to start.
Comments:
 In the Auto mode, the air conditioner can logically
select between cooling, fanning and dehumidifying
by detecting the difference between the actual
room temperature and the temperature set in the
remote control.
 In Auto mode, you cannot select the fan speed;
this occurs automatically.
 When the Auto mode is not comfortable, then
manually select COOL, DRY or FAN.
Cool and Fan operations
1. Press on the MODE button to select the COOL or
FAN function.
2. Press on TEMP
temperature.
3. Press on the FAN SPEED to select the fan speed
AUTO-HIGH-LOW.
Auto is not indicated on the display of the remote
control (but is indicated on the display of the air
conditioner).
4. Press on the ON/OFF button to start.
Remark:
In the FAN function, the set temperature is not visible
on the display of the remote control. Also the
temperature cannot be regulated. Only steps 1, 3 and 4 can be executed.
or to set the desired
or to set the desired
78