Insert one end of the discharge hose into the connecting piece of the window
-
discharge or the wall discharge and the other end into the connecting piece of
the air conditioner. The hose clamps automatically due to the spring clamps
on the connecting pieces.
Now affix the hose to the appliance by sliding the air conditioner's connecting
-
piece into the groove at the bottom of the air outlet (8) in such a way that
the clamp sits at the top of the recess. Press it until you hear a click.
Subsequently, select either installation 1 or installation 2.
Installation 1
Prepare the window frame girder for
-
use. Adjust the length to the
dimensions of your window. If the
length demands two girders, use the
plastic locking to affix the girders at the
correct length.
70