EUROM Coolsmart 90 Manuel D'utilisation page 69

Installation
The Eurom Coolsmart 90 and 120 are portable air-conditioners and air dehumidifiers
that can be moved from one room to another.
 Remove the packaging material, keep it out of children's reach and make sure
that the appliance remains standing upright.
 Before use, check whether all the accessories are
present and whether the appliance and the
accessories do not show any damage. Do not start
using a damaged appliance, but return it to your
supplier!
 Place the appliance on a firm, even, dry and
horizontal surface close to a socket and drainage
possibility for warm air, for example, by a window
that can be slightly opened. Make sure that the
appliance has at least 50 cm free space on all sides
and observe all the directions stated in the safety
instructions.
 In addition to the accessories delivered with the
package, you will need the following for installing the appliance:
Screwdriver (medium-size)
-
Measuring tape or steel tape measure
-
Scissors or knife and perhaps a saw to shorten the window frame girder in
-
very small windows
To dehumidify, connect a condensate drain hose to the connection point for the

water drain hose (7). Lead this hose into a bucket or pit. The hose must not be
routed upwards! Your appliance is now ready for use. Also see the section about
water drainage.
To cool, you have to discharge the warm air to the outside. The discharge hose

can be installed according to the options below:
1. through a window with the help of the window frame girder
2. through the wall
First, connect the connecting pieces of the window or wall and connect the air
conditioner to the discharge hose in the following way:
69