Contents; Declaration Of Conformity; Receipt, Storage And Handling - Lorentz PSk2-7 Manuel D'installation Et De Fonctionnement

1 Declaration of Conformity

We, BERNT LORENTZ GmbH & Co. KG, Siebenstuecken 24,
24558 Henstedt-Ulzburg, Germany, declare under our sole
responsibility that the products
PSk2 C-SJ Series
PSk2 CS-F Series
PSk2 CS-G Series
to which the declaration relates, are in conformity with the
Council Directives on the approximation of the laws of the
EC Member States relating to:
ƒ Machinery (2006/42/EC)
ƒ Electromagnetic compatibility (2014/30/EU)
ƒ Electrical equipment designed for use with certain
voltage limits (2014/35/EU)
Henstedt-Ulzburg, Germany
1 January 2016
Bernt Lorentz, CEO
Declaration of Conformity

2 Receipt, Storage and Handling

Table 2: Controller packing list
#
Item
1
PSk2 controller
2
Key for front door
3
Sun Sensor module 1.5 Wp
4
Cable gland reducers for motor cable
5
Manual
6
Backplate
Check upon receipt that the packaging is undamaged and
complete. If any abnormity is found, contact your supplier.
LORENTZ pumps are supplied from the factory in proper
packing in which they should remain until they are to be
installed at the site. Handle the pump with care and avoid
unnecessary impacts and shocks.
Prolonged intermediate storage in an environment of high
humidity and fluctuating temperatures must be avoided.
Moisture condensation may damage metal parts. Non-com-
pliance can void the warranty. It is recommended storing the
parts in a closed and dry room.
The motor, the pump end and controller can be stored (not
used) in the range of –20 °C to +65 °C (–4 °F to +149 °F).
The components should not be exposed to direct sunlight.

Contents

9 9
QTY
1 unit
1 unit
1 unit
4 units
1 unit
1 unit