Dru Verwarming METRO 80E Manuel D'installation Et D'entretien page 24

INSTALLATION AND SERVICE MANUAL
Now hold the effect glass sheet (11) at the top and the
bottom and carefully remove it (situation I);
Unscrew the 4 parkers (situation J) to remove the
cover plate (17) in front of the main PCB;
Remove the 2 parkers that connect the heat outlet
(12 – Fig. G) to the fi tting frame (7 – Fig. G)
(situation K);
Remove the cable harness from the cable clip. This is
necessary to protect the cable harness and the heating
element from damage (situation L);
463385-D84-03-NL.indd Sec1:8 463385-D84-03-NL.indd Sec1:8
Situation H
Situation I
Situation J
Situation K
Situation L
Remove the 4 parkers that connect the entire
heating unit (13) to the cabinet (14)
(situation M) (attention: support the
heating unit with one hand during
unscrewing. If the unit falls, the electronic
equipments may be severely damaged and
this may lead to hazardous situations!);
Situation M
Tilt the entire heating unit (13) forwards and carefully
rest the heat outlet (12 – Fig. G) on the heating bed
(fi gure H and I). Remove the 3 parkers and the
touchprotection container (15) from the fi replace
(situation N);
Ensure that the appliance is voltage-free!
8 8
07-12-2007 11:09:35 07-12-2007 11:09:35