Hazard And Warning Information; Authorised Individuals; Preparations Prior To Starting; Disposal Information - Renfert SYMPRESS Mode D'emploi

B. Hazard and Warning
Information
Only intended for indoor use. The unit is
only designed for dry applications and may
not be operated or stored outdoors or un-
der wet conditions.
The unit may only be operated with a pow-
er cord equipped with a plug appropriate to
the local power supply.
Before commissioning, compare the infor-
mation on the nameplate with den the spec-
ifications of your local mains power supply.
Regularly inspect connecting lines and hos-
es (e.g., the power cord) for damage (e.g.,
kinks, cracks, porosity) or signs of aging.
Units exhibiting damaged connecting lines,
hoses, or other defects must be taken out
of service immediately.
Portable and mobile communication devic-
es (e.g. cell phones) can affect the function-
ing of the unit.
The unit must not be placed directly next to
other pieces of electrical equipment. If this
is unavoidable, the unit and the other items
of electrical equipment should be checked
to rule out any malfunctioning caused by
electromagnetic interference.
Always unplug the unit from the wall out-
let before beginning any work on the unit's
electrical components.
Do not allow the unit to be operated without
supervision.
Note any hazard or warning information
provided by the material manufacturer.
Do not operate in an explosion-prone area.
It is the responsibility of the operator that
national regulations during operation and
regarding a repeated safety inspection of
electrical equipment are complied with.
For Germany these are MPBetreibV in rela-
tion with DIN EN 62353 (VDE0751).
Only spare parts and accessories supplied
or authorized by Renfert GmbH may be
used with this product. If other spare parts
or accessories are used, this could have a
detrimental effect on the safety of the de-
vice, increase the risk of serious injury and
lead to damage to the environment or the
device itself.
Information on REACH and SVHC is avail-
able on our website www.renfert.com, in the
Support area.
C. Authorised Individuals
This product may not be used by minors under the
age of 14.
Only properly trained individuals may operate and
service the unit.
Any repairs not specifically described in these operat-
ing instructions may only be performed by a qualified
electrician.
D. Preparations Prior to
Starting
Before operating the unit, make sure the
voltage information on the nameplate
corresponds to your local power supply.
E. Maintenance / Repair
Repairs may only be performed by qualified electri-
cians or authorized dealers.
F. Disposal Information
F.1 Disposing of Consumables
Empty cartridges and tubular bags as well as used
mixing nozzles must be disposed of in accordance
with the manufacturer's instructions.
F.2 Instrument Disposal
The instrument must be disposed of by a specialist
facility. This specialist facility must be informed of any
hazardous residue in the instrument.
F.2.1 Disposal Information for EU
Nations
In order to maintain and protect the environment, to
prevent environmental contamination and to improve
the reutilisation of raw materials (recycling), the Euro-
pean Commission has established guidelines accord-
ing to which manufacturers must take back electrical
and electronic devices in order to forward them to a
regulated disposal or recycling system.
Within the European Union, devices identified with
this symbol may therefore not be disposed of with un-
sorted municipal solid waste:
For more information regarding proper disposal
please apply at your local authorities.
- 7 -
EN