Operating And Display Functions - Renfert Easyclean Mode D'emploi

4.6 Operating and display
functions
see also Figure 3
Action
switch on unit
switch off the unit
start ultrasound
- now -
start ultrasound
- temperature-controlled*);
with mixing of cleaning liquid
*) if set temperature > actual
temperature
stop ultrasound before end
of set period
switch on heating
switch off heating by hand
switch on sweep function*)
*) sweep and degas cannot be
operated at the same time
switch off sweep function
switch on degas function*)
*) sweep and degas cannot be
operated at the same time
switch off degas function
switch on auto degas func-
tion*)
*) sweep and degas cannot be
operated at the same time
EN
Setting Result
• press on/off key • unit is ready for
• press on/off key • unit is switched off
• select period by turn- • ultrasound is
ing knob for cleaning
period
• press key ►■
(ultra-sound)
• set period • heating operates
• set temperature • ultrasound is started
by turning knob for
temperature
• keep key ►■
pressed for > 2 sec • set period ultrasound
• turn set period to 0 • ultrasound switched
or
• press key ►■
• select set • heating operates
temperature
• turn set temperature • heating switched off
to position „0"
• select set period • ultrasound operates
• press key ►■
• press key sweep
• press key sweep • sweep function is
• ultrasound continues
• select set period • ultrasound operates
• press key ►■
• press key degas
• press key degas • degas function is
• ultrasound continues
• press key ►■ • ultrasound operates
• keep degas key
pressed > 2 sec
Display
• on/off LED is on
operation
• all displays are off
• ultrasound LED is on
operating • set period LED is on
• remaining period LED blinks
(only in timer operation)
• ultrasound LED blinks
• set period LED blinks
automatically after • as soon as the set temperature is
reaching the set tem- reached the ultrasound LED is on
perature • set period LED is on
• remaining period LED blinks
runs down
• ultrasound LED is off
off • set period LED is on
• set temperature LED is on
• actual temperature LED blinks and
goes towards set temp.
• as soon as actual temp. = set temp.,
only the set temp. LED is on
• if actual temperature > set tem-
perature, the temperature LED starts
blinking again
• set temperature LED blinks
• sweep LED is on
in sweep mode • ultrasound LED is on
• set period LED is on
• remaining period LED blinks
• sweep LED is off
switched off • ultrasound LED is on
• set period LED is on
in standard operating • remaining period LED blinks
mode
• degas LED is on
in degas mode • ultrasound LED is on
• set period LED is on
• remaining period LED blinks
• degas LED is off
switched off • ultrasound LED is on
• set period LED is on
in standard operating • remaining period LED blinks
mode
• degas LED blinks
in auto degas mode • ultrasound LED blinks
for 10 minutes and
then switches off
- 4 -