Sanremo F18 Livret D'instructions page 105

Counter display
Press button (3) to display the following screen:
Press the buttons "<" or ">" to scroll the counter
display menu: starting from group "1", the
following will be displayed in a sequence: quantity
of coffee dispensed for the various doses (long
black, short black, etc.); press the "←" button to
quit this stage and return to the main programming
screen.
It is possible to reset counters of each group by
pressing the button "RESET".
Frontal lights
Press button (4) to display the following screen:
Press the button "+" or "-" to turn on or off the
frontal lights, press the "√" button to confirm the
selection and press the button "←" to exit to the
programming page.
Programming
Set the cup heating plate
Press button (5) to enable or disable the activation
of the cup heating plate; the following screen is
displayed:
It is possible to enable or disable the heating
element of cup heater by pressing the buttons "+"
or "-" Press the button"√" to confirm the selection.
Press the button ">" to modify the temperature of
cup heater and press the button"√" to confirm.
Press the button "←" to exit to the programming
page.
Clean dispensing units
Press the button (6) to start the automatic cleaning
of all dispensing unit at the same time.
WARNING: before pressing
button (6) prepare the machine
for automatic washing as
described in the relevant
"UNIT AUTOMATIC WASHING"
paragraph.
Alarm list
Press the button (7) to show the active alarm list
and the telephone number of assistance service,
if set.
Set coffee water temperature
Press button (8) to display the following screen:
105
F18
EN