Night Mode Button - Panasonic FLYER Mode D'emploi

Night mode button

Change the backlight brightness of the display unit. Backlight setting has a normal mode and night mode. Five stages of brightness can be set
for each mode.
In night mode, the brightness is lowered compared to normal mode so that glare can be reduced while travelling at night.
1) Press the power button.
● The electric bicycle system is turned on and the backlight of the display unit lights in normal mode.
2) Press the night mode button.
● The night mode indicator is displayed on the display unit and the backlight changes to night mode. To change to normal mode, press
the night mode button again.
Note
● If you set the same brightness for both normal mode and night mode, the brightness does not change even when the mode is switched.
● Set the brightness of the normal mode while the night mode indicator is not displayed. Set the brightness of the night mode while the night
mode indicator is displayed. ( page 159)
● If the night mode button is pressed while the electric bicycle system is turned off, the display unit activates with the brightness set for night
mode, and functions other than the assist function will operate. To travel using the assist function, press the power button.
If the night mode button is pressed again, the display unit will turn off and functions will also stop.
● Depending on the specifications of the completed bicycle, if the electric bicycle battery-powered head light or tail lamp is equipped, it will light
in night mode.
Chapter 3 Methods of Use — Console

Night mode button

Night mode indicator
Power button
163
EN