Basic Settings - Panasonic FLYER Mode D'emploi

Basic settings

Basic settings such as the language displayed on the display unit, adjustment of backlight brightness and time can be changed.
Access the basic setting menu, and change the settings as desired. In the basic setting menu, the following items can be switched and set.
[LANGUAGE]
[CONTRAST]
[BRIGHTNESS]
[UNIT]
[WHEEL]
[ODO INPUT]
[CLOCK]
Setting of [LANGUAGE]
e.g. You want to change the language to German.
Fig. 1
1) Hold down the [MODE] button and the assist mode select button ( ) on the operation unit until
[LANGUAGE] is displayed at Text indication on the display unit. (Fig. 1)
2) Press the [MODE] button to set [LANGUAGE].
3) Press the assist mode select buttons ( / ) to select the language you want to change. (Fig. 2)
● When holding down the assist mode select buttons ( / ) for two seconds, the display will change fast.
4) Press the [MODE] button to fix the language. (Fig. 3)
5) Press the night mode button.
● The changed setting is stored in memory on the display unit.
Setting of [CONTRAST]
The contrast can be adjusted in ten stages between level 1 to level 10. At the level 1, no bar is displayed. When the level rises by one, the
number of bars also increases by one. At level 10, nine bars are displayed.
e.g. You want to change the contrast from the level 4 to level 8.
Fig. 1
1) Hold down the [MODE] button and the assist mode select button ( ) on the operation unit until
[LANGUAGE] is displayed at Text indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons ( / ) to select [CONTRAST] and press the [MODE] button to set
[CONTRAST]. (Fig. 2)
● The screen for level 4 is displayed.
3) Press the assist mode select buttons ( / ) to select the contrast you want to change, and press the
[MODE] button to fix the contrast. (Fig. 3)
● The screen for level 8 is displayed.
● When holding down the assist mode select buttons ( / ) for two seconds, the display will change fast.
● The set contrast is reflected on the display unit.
4) Press the night mode button.
● The changed setting is stored in memory on the display unit.
Chapter 3 Methods of Use — Console
The language displayed on the display unit can be switched. The language can be selected from the
following ten languages:
English, German, Dutch, French, Italian, Spanish, Finnish, Swedish, Norwegian, Danish
The contrast of the display unit LCD can be adjusted in ten stages.
The brightness of the backlight of the display unit LCD can be adjusted in five stages. The brightness can
be set separately for when the night mode indicator is turned on and when it is turned off.
The display unit for speed and distance can be toggled between kilometers and miles.
The tire circumference matched to the electric bicycle currently in use can be set.
The display of the total distance travelled can be changed.
The time can be adjusted.
Fig. 2
Fig. 2
159
Fig. 3
EN
Fig. 3