Removing The Display Unit Of The Console - Panasonic FLYER Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1) Align
of the display unit and
the illustration until
2) Press the power button on the display unit. (Fig. 2)
● Make sure that power is supplied to the display unit from the battery and that the LCD display lights.
Note
● Before mounting the display unit, wipe the contact surface on the top of the cradle or the contact surface on the rear of the display unit with a
soft, dry cloth if it is wet or dirty.
Fixing the display unit in place
If the display unit is not to be removed, it can be fixed in place on the cradle.
1) Remove the cradle from the handlebar.
2) Mount the display unit on the cradle.
3) Fix the display unit in place on the rear of the cradle using the setscrew (M4 x L10) in the screw hole
on the cradle. (Fig. 1)
4) Mount the cradle on the handlebar.

Removing the display unit of the console

Remove the display unit from the cradle after turning the electric bicycle system off.
1) Press the power button on the display unit to turn off the electric bicycle system.
● If the electric bicycle system is already turned off, proceed to step 2).
● When the display unit is fixed in place on the cradle using the setscrew, confirm that the setscrew is removed, and proceed to step 2).
2) Slide the display unit in the direction of the arrow in the illustration with the lock latch on the cradle
pressed down to remove the display unit. (Fig. 1)
Note
● If the display unit is removed with the electric bicycle system still turned on, the screen display goes out, and the assist function also stops
after about three seconds.
● Do not remove the display unit while you are travelling.
● When mounting the removed display unit on the cradle again to use it, confirm that the display unit operates properly.
Chapter 2 Getting Started — Display unit of the console
of the cradle, and slide the display unit in the direction of the arrow in
of the display unit moves to ● position to mount it on the cradle. (Fig. 1)
Lock latch
Fig. 1
Display unit
Cradle
Fig. 1
152

Publicité

Table des Matières
loading

Table des Matières