Panasonic FLYER Mode D'emploi page 162

Setting of [CLOCK]
Fig. 1
1) Hold down the [MODE] button and the assist mode select button ( ) on the operation unit until
[LANGUAGE] is displayed at Text indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons ( / ) to select [CLOCK] and press the [MODE] button to set
[CLOCK]. (Fig. 2)
3) Press the [MODE] button to select the hours or minutes to change, and press the assist mode select
buttons ( / ) to change the number.
● The time is displayed in 24-hour format.
● Each time you press the [MODE] button, you can select the number in order of the tens place for the hours, the one place for the hours,
the tens place for the minutes, and the one place for the minutes.
● When holding down the assist mode select buttons ( / ) for two seconds, the display will change fast.
4) Set the value of the one place for minutes, and press the [MODE] button to fix the time. (Fig. 3)
5) Press the night mode button.
● The changed setting is stored in memory on the display unit.
● When the night mode button is pressed, the clock starts to tick from the time changed.
Chapter 3 Methods of Use — Console
Fig. 2
162
Fig. 3