Console; Battery Level Display; Assist Mode Select Buttons - Panasonic FLYER Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Console

The console has a display for indicating the remaining battery level and which assist mode is currently in use, and buttons such as the power
button and assist mode select buttons.
The following describes the displays and buttons.

Assist mode select buttons

Battery level display

The battery level displays not the charged state of the coin-type battery inside the display unit of the console, but the charged state of the
battery on the electric bicycle.
The charged state of the battery on the electric bicycle can also be checked by the battery LED. ( page 145)

Battery level display

Percentage of battery
level compared with fully
charged battery
*
The display changes as follows when there is no longer any remaining battery power.
1
● Display unit on the console: One battery level indication lamp blinks and then goes out (hidden).

Assist mode select buttons

The five assist modes can be selected by pressing the assist mode select buttons.
Assist Mode
Start
Flat road
HIGH
Powerful
STANDARD
ECO
NO ASSIST
AUTO
*
Mid
Low
2
The assist force may change depending on weather conditions, road conditions, bicycle conditions, or riding styles.
*
1
*
If [AUTO] mode is not installed, [AUTO] is not available.
2
1) Press the assist mode select buttons ( / ) until the desired assist mode is displayed.
● Display unit on
console: The assist mode selected in the assist mode display is displayed.
the
Chapter 3 Methods of Use — Console
Night mode button
Bicycle mark button (Walk assistance)
5 lit
4 lit
81% to 100%
61% to 80%
Uphill
Downhill
OFF
Mid
OFF
Low
OFF
OFF
Mid -
OFF
Powerful
Battery level display
3 lit
2 lit
41% to 60%
21% to 40%
Level
Assist from motor unit
Flat road
*
On flat and uphill roads, a powerful assist force is
1
Powerful
provided for a comfortable ride on slopes and carrying
heavy loads.
Mid
*
On flat and uphill roads, a mid assist force is provided.
1
*
On flat and uphill roads, a low assist force is provided
1
Low
allowing for a longer distance traveled by a single
charge.
*
1
No assist force.
*
Depending on road conditions, the assist force
1
Low
automatically changes from low to powerful.
155
1 lit
1 blinking*
1
11% to 20%
1% to 10%
EN

Publicité

Table des Matières
loading

Table des Matières