Panasonic FLYER Mode D'emploi page 160

Setting of [BRIGHTNESS]
The brightness can be adjusted in five stages from OFF (no backlight), and level 1 to level 4. One bar is displayed at level 1, three bars are
displayed at level 2, six bars at level 3, and nine bars at level 4.
e.g. You want to change the brightness from the level 4 to level 2.
Fig. 1
1) Hold down the [MODE] button and the assist mode select button ( ) on the operation unit until
[LANGUAGE] is displayed at Text indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons ( / ) to select [BRIGHTNESS] and press the [MODE] button to
set [BRIGHTNESS]. (Fig. 2)
● The screen for level 4 is displayed.
3) Press the assist mode select buttons ( / ) to select the brightness you want to change, and press the
[MODE] button to fix the brightness. (Fig. 3)
● The screen for level 2 is displayed.
● When holding down the assist mode select buttons ( / ) for two seconds, the display will change fast.
● The set brightness is reflected on the display unit.
4) Press the night mode button.
● The changed setting is stored in memory on the display unit.
Note
● Backlight setting has a normal mode and night mode. The corresponding backlight setting will change depending on whether the light turns
on or off. ( page 32)
Setting of [UNIT]
e.g. You want to change the unit display from kilometers to miles.
Fig. 1
1) Hold down the [MODE] button and the assist mode select button ( ) on the operation unit until
[LANGUAGE] is displayed at Text indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons ( / ) to select [UNIT] and press the [MODE] button to set [UNIT].
(Fig. 2)
3) Press the assist mode select buttons ( / ) to select the mile display, and press the [MODE] button to
fix the mile display. (Fig. 3)
4) Press the night mode button.
● The changed setting is stored in memory on the display unit.
Chapter 3 Methods of Use — Console
Fig. 2
Fig. 2
160
Fig. 3
Fig. 3