Mounting The Battery - Panasonic FLYER Mode D'emploi

Mounting the battery

Fig. 1 to Fig. 4 show how to mount the center-type battery on the left and the slide-type battery on the right.
Lower holder
Lower holder
Fig. 1
Tab
Opening for attachment
Fig. 2
1) Place the battery on the lower holder of the electric bicycle. (Fig. 1)
2) Remove the terminal cover (optional) from the opening for attachment on the electric bicycle, and
while aligning the groove of the opening and the battery tab, mount the battery. (Fig. 2)
3) Raise the battery straight up and attach the battery to the upper holder. (Fig. 3)
● Make sure that the battery fits firmly into the holder.
4) Lock the battery using the battery lock key. (Fig. 4)
● If the battery is not locked, it may fall off the holder.
After locking the battery, remove the battery lock key to prevent the battery from being stolen.
● Make sure that the battery never comes off by pulling it toward you.
Chapter 2 Getting Started — Battery
Tab
Opening for
attachment
Upper holder
147
Upper holder
Fig. 3
Fig. 4
EN