Names And Functions Of Parts; Console - Panasonic FLYER Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Names and functions of parts

The main components of the electric bicycle system are the console, battery, motor unit, battery charger, and speed sensor.

Console

The console comprises a display unit and operation unit.
(For the Di2 Operation Unit and related devices, separate components must be purchased.)
Operation unit
2
1
1
4
1 Assist mode select buttons ( / )
Selects the assist mode from [HIGH], [STANDARD], [ECO],
[NO ASSIST] and [AUTO].
* If [AUTO] mode is not installed, [AUTO] is not indicated on the
display unit.
2 Night mode button
* Lights the backlight of the display unit.
When power is supplied to the head light or tail lamp from the
battery on the electric bicycle, the head lamp or tail lamp lights. It
depends on local regulation. ( page 32)
3 [MODE] button
Switches display items such as distance travelled.
( page 25)
4 Bicycle mark button (Walk assistance)
Drive can be assisted up to 6 km/h when pushing the electric
bicycle with a heavy load on it.
5 Battery level display
Displays the battery remaining capacity.
6 USB connection mark
Displayed when an external device (e.g. mobile phone) is
connected to the display unit for charging.
7 Assist power indicator
Displays in the form of a graph how much the rider is being
assisted. The larger the number on the graph, the more the rider
is being assisted.
8 Text indication
Displays the current assist mode, etc.
Chapter 1 Preparation — Names and functions of parts
Display unit
6
3
7
8
13
14
5
9
10
11
12
15
9 Time display
Displays the current time.
10 Night mode indicator
Lights when the night mode button is pressed.
11 Speed indication
Displays the current travel speed.
12 Value indication
Displays distance travelled, total distance travelled, maximum
speed, etc.
13 Power button
Turns on and off the electric bicycle system.
14 Micro USB port
Used to charge an external device (e.g. mobile phone).
( page 33)
15 Rubber cap
Protects the Micro USB port.
16 Reset button
Used to set the total distance travelled to "0". ( page 25)
17 Coin-type battery compartment
A coin-type battery is housed here for the time display of the
display unit.
18 Shifting button (up)
Each time this switch is pressed, the gear ratio shifts up.
19 Shifting button (down)
Each time this switch is pressed, the gear ratio shifts down.
141
Di2 Operation unit
18
19
Backside
16
17
EN

Publicité

Table des Matières
loading

Table des Matières