Motor Unit - Panasonic FLYER Mode D'emploi

■ Console
Do not modify or disassemble the console.
Do not use or leave the console lying around in high temperatures.
● This may cause damage or heat, which may lead to fire.
Do not use the bicycle mark button (Walk assistance) when the wheels of the electric bicycles are not in contact with
the ground.
● It may cause injury.

■ Motor unit

Do not modify or disassemble the motor unit.
● This may cause damage or overheating, which may lead to fire.
Unauthorized opening of the motor unit will void any and all warranty claims.
All components mounted to the motor unit and all other components mounted on the electric bicycles (e.g. the
chain wheel, crank, rear gear, derailleur, wheels, sprocket) should be replaced only with identical components or
components that conform to the electric bicycles.
Use the motor unit only for the electric bicycles.
● This may cause injury.
Do not use the components for other purposes.
■ Battery charger
Do not short-circuit the charger terminals with metallic objects.
● This may cause the charger to overheat, catch fire or produce an electric shock.
Do not bring the charger terminals into contact with the button-type or coin-type battery.
● The button-type or coin-type battery may explode and cause fire.
Do not handle the power plug with wet hands.
● This may cause electric shock.
Do not overload the plug socket or extension plug cables.
● If the power supply is overloaded (e.g. by using too many adaptors), overheating may occur which will result in fire.
Do not wind the power cord around the battery charger when storing.
● The power cord or plug may be broken. Continuous use of the damaged power cord or plug may result in electric shock,
malfunction, or fire.
Do not attempt to do the following.
- Hit the charger - Drop the charger - Use near leaking water - Use in humid places
● This may cause the charger to overheat, catch fire, or produce an electric shock.
Do not leave the charger in a place where children or pets can touch it.
● Children or pets may damage the cord which may result in electric shock, malfunction, or fire. Pull out the power plug and
wipe it with a dry cloth.
Do not use the charger on anything other than the specified electric bicycles.
● This may result in injury.
The supply cord cannot be replaced.
● If the cord is damaged the appliance should be scrapped.
Fully insert the power plug.
● If the plug is not inserted correctly, electric shocks or overheating may result.
Clean the power plug regularly to prevent it from becoming covered in dust.
This may cause a fire.
● If dust builds up on the power plug, the resulting humidity can damage the insulation.
Pull out the power plug from the plug socket and wipe it with a dry cloth regularly.
Read this first!
WARNING
135
EN