1.1. Targed Group; Technical Changes; General Symbols - ACO Oleosmart-C-OST Instructions De Service Et De Maintenance

1 Introduction

1.1. Targed group

These instructions are intended for
technically trained experts
The personnel must have the relevant
qualifications for installa-tion, assembly,
operation, maintenance and inspection.
The areas of responsibility, competence,
and supervision of the personnel must
be precisely defined and regulated by the
opera-tor for all installation, assembly,
operation, maintenance and ins-pection
activities. Any skills deficits of the
personnel must be corrected by the trai-
ning and instruction of the personnel by
Important
Please read these operating and mainte-
nance instructions carefully before com-
missioning the separator. The directions
specified in these operating and mainte-
nance instructions must be strictly com-
plied with. This is for your benefit because
it will enable you to:
1.2

Technical changes

ACO Tiefbau Vertrieb GmbH reserves the
right to make technical changes to the
separators with regard to the specifica-
tions and pictures in these operating and
maintenance instructions.
1.3

General symbols

Special directions are included throughout
the operating and maintenance instruc-
tions wherever special aspects have to be
taken into consideration. These special
Operating and maintenance instructions
adequately trained experts. If necessary,
the training courses can be carried out by
the manufacturer/supply on behalf of the
operator. All training carried out on the
equipment itself must always be supervised
by technical experts.
Consequences and risks associated
with failure to observe the instructions:
non-compliance with these instructions
leads to the loss of warranty and damage
claims.
ensure that the system operates safely
ensure that the efficiency and cost-
effectiveness of the system will be
enhanced to your satisfaction
ensure that faulty operation and prob-
lems are avoided
avoid costs for repairs and shut-downs
directions consist of a symbol, a signal
word, and the accompanying text. The
general symbols used are as follows:
Warning
This symbol accompanies all the opera-
tional safety instructions in this manual
which could be associated with a risk to
human life and health. It is very important
in these cases to observe the instructions
and to act cautiously. All of the operation-
al safety instructions must be passed on
to other persons operating the system.
The instructions in this manual must be
observed in addition to the general
safety and accident prevention regula-
tions.
non-compliance can give rise to the
following risks amongst others:
– Risks to persons as a result of
electrical, thermal, mechanical and
chemical influences, as well as
explosions
– Failure of vital product functions
– Failure of stipulated methods for
maintenance and servicing
– Risk to the environment as a result of
the leakage of hazardous substances
make a valuable contribution to environ-
mental protection
maintain the warranty
Caution
This symbol highlights those positions in
the instruction manual where special care
has to be taken to ensure compliance with
the directives, standards, regulations.
instructions and the proper sequence of
the work carried out, as well as where
there is a risk of damaging the system,
the components and the surroundings,
and to ensure smooth operations.
Environmental protection
This symbol highlights environmental pro-
tection measures.
Page 19 of 51