Software Update; Set-Up Wizard; Info - TechniSat DIGITRADIO 143 CD Mode D'emploi

> If you actually wish to reset the radio, select the security prompt [YES] or abort the process with [NO].
After completion of the factory settings the radio switches to standby. When next switched on, the set-up wizard is
launched again (Section 4).

14.6 Software update

From time to time software updates may be provided which could contain improvements or bug fixes. This keeps the
DIGITRADIO permanently up-to-date.
> Go to MENU > System settings > Software update.
> If the DIGITRADIO 143 CD is to search periodically for new software versions, go to [Auto update] and select > [YES], or
select [NO] if this is not to be carried out automatically.
> Select [Check now], if you want to check directly whether a new software version is available.
If a software update has been located, follow the instructions on the display.
In order to find and upload software updates, the radio must be connected to the Internet.
Do not switch the DIGITRADIO 143 CD off during the update process!

14.7 Set-up wizard

The set-up wizard starts automatically after switching on the DIGITRADIO 143 CD for the first time, after retrieving the factory
settings, or can be launched manually in MENU > System settings > Set-up wizard. Go to Section 4 to see how to configure the
set-up wizard.

14.8 Info

> In MENU > System settings > Info you can see the software version currently installed in the device as well as, for
example, the Spotify version.
48