Automatic Station Selection; Setting Mono/Stereo; Saving Usw Stations - TechniSat DIGITRADIO 143 CD Mode D'emploi

9.4 Automatic station selection

> Press the SCAN button to start the automatic station scan. The station frequency runs upwards on the display.
or
> Keep or pressed for approx. 2 seconds to automatically search for the next station with a strong enough signal.
p q
If a FM station with sufficient signal intensity is found, the scan stops and the station is played. If an RDS station is being
received, the station name appears and, possibly, radio text.
Please use manual station selection for setting weaker stations.
In Menu > Scan setting, you can set whether the scan only finds strong stations (Strong stations only > YES) or all stations
(Strong stations only > NO). To do so press the MENU button and > Scan settings. Confirm the selection with OK.

9.5 Setting mono/stereo

> Press the MENU button and use p or q to select > Audio setting.
> Select YES or NO, for playback in mono sound only in the event of weak FM reception.
> Confirm by pressing OK.

9.6 Saving USW stations

The favourites memory can store up to 30 stations in the USW range.
The saved stations remain stored even in the event of a power cut.
> Setting the desired stations.
> Keep the PRESET button pressed until the favourites memory list appears.
32