Fm Mode; Switching On Fm Radio Mode; Usw Reception With Rds Information; Manual Station Selection - TechniSat DIGITRADIO 143 CD Mode D'emploi

9 FM mode

9.1 Switching on FM radio mode

> Press the MODE button as often as required until [FM Radio] is shown on the display.
Alternatively:
> Press the MENU button and in the Main menu select > FM.
If you are in a submenu, select the main menu as described in Section 3.7.
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the station last set.
In the case of RDS stations, the station name appears.
To improve reception, readjust the antenna if required.

9.2 USW reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters with RDS might, for example, broadcast
their station name or the programme type. This is shown on the display.
The device can show the following RDS information
RT (Radio text),
PS (Station name),
PTY (Programme type).

9.3 Manual station selection

> Press or in USW mode to set the desired station. The display shows the frequency in steps of 0.05 MHz.
p q
EN
FR
IT
NL
PL
CZ
SK
31