Display Settings; Manual Setting; Netremote Pin Setup; Delete Network Profile - TechniSat DIGITRADIO 143 CD Mode D'emploi

14.2.3 Display settings

> Select [Display settings] to display the current network settings.

14.2.4 Manual setting

Manual setting of the connection parameters is described for LAN in Section 14.2.1.2 and for a wireless network (WLAN) in
Section 14.2.2.3.

14.2.5 NetRemote PIN setup

Under certain circumstances, it may be necessary to secure the connection to the DIGITRADIO 143 CD with a PIN.
> Enter a 4-digit PIN under [NetRemote PIN Setup].

14.2.6 Delete network profile

Use this menu item to end an existing connection to a WLAN and to delete the settings carried out. If you want to connect the
device to this network again, all the settings need to be carried out again.

14.2.7 WLAN/LAN connection on standby

> Under [Allow WLAN/LAN on standby?], select whether the WLAN/LAN connection is to be maintained in standby mode
(YES) or not (NO).

14.3 Time settings

> Via MENU > System settings > Time and date you can retrieve and configure the settings for the time and date.

14.3.1 Time/date setting

> Select [Time/date setting] to set the time and date manually.
> Use the p or q arrow buttons to change a value and confirm by pressing the OK button.
Each time the OK button is pressed, the highlight skips to the next value.
46