Quick Search; Repeat Function; Random Playback; Programming Function - TechniSat DIGITRADIO 143 CD Mode D'emploi

12.2.2 Quick search

Whilst the track is running, it is possible to perform a quick search forward or back to search for a specific position. There is no
playback during the search process.
> Keep the Skip track forward/back (3, 15) buttons on the remote control pressed to perform a quick search forward or
back within a track for as long as the button is pressed.

12.2.3 Repeat function

You can select whether you wish to repeat a track, the entire folder/album (only for MP3 CDs) or all of the elements on the CD.
> To do so, press the Repeat track button repeatedly on your remote control (4). The selected mode is shown on the
display (Repeat track
> To switch off the function again, press the Repeat track button as often as required until the repeat display is no longer
shown.

12.2.4 Random playback

With the random generator, the CD tracks can be played back in random order.
> During ongoing playback, press the Shuffle button on the remote control (5) and the display shows the symbol for
random playback
> To switch the function off again, press the Shuffle button again.

12.2.5 Programming function

The programming function allows you to play up to 32 tracks on a music CD or 64 tracks on an MP3/WMA-CD in an
order of your choice.
You can only undertake the programming if there is a disc in the closed CD compartment and if the device is in stop
mode.
> You access the stop function by pressing the STOP button on the remote control (16).
38
, Repeat folder/album
.
, Repeat all tracks ).