Dab Radio Reception; Performing A Station Scan - TechniSat DIGITRADIO 143 CD Mode D'emploi

8 The DAB function
DAB+ is a digital format through which crystal clear sound with no noise can be heard. In contrast to conventional analogue
radio stations, DAB+ can be used to broadcast multiple stations on the same frequency. You can find further information, for
example, at www.dabplus.de

8.1 DAB radio reception

> Press the MODE button as often as required until [DAB Radio] appears on the display.
Alternatively:
> Press the MENU button and then select Main menu > DAB.
If you are in a submenu, first of all select the main menu as described in section 3.7.
If DAB is being started for the first time, a complete station scan is performed. The station list is then shown (see Section
8.3).

8.2 Performing a station scan

The automatic scan [Complete scan] scans all DAB Band III stations and thereby finds all stations being broadcast
within the reception range.
After ending the scan, the first station in alphanumeric order will be played.
> In order to perform a complete scan, press the SCAN button. [Scan] appears on the display. The scan starts and the
progress bar appears on the display.
> When completed, press p or q and OK to select a station.
Alternatively:
> Press the MENU button and use p or q to select > Complete scan. Confirm by pressing OK.
If no station is found, check the antenna position and change the location if required. Check whether digital radio
stations are being broadcast in your area.
or www.dabplus.ch.
EN
FR
IT
NL
PL
CZ
SK
27