Menu Operation - TechniSat DIGITRADIO 143 CD Mode D'emploi

3.7 Menu operation

The menu is divided into the Main Menu, the Submenu for the currently selected source, and System Settings, which apply to
all sources. Operation within the menu takes place using the SCROLL&SELECT knob (14) on the device or using the up/down
arrow buttons (22, 24) and the OK (9) button on the remote control.
> To open the submenu corresponding to the currently selected source, press the MENU button on the device or on the
remote control.
The source-specific settings and options are in the submenu corresponding to the currently selected source. From here
you can also access the > Main Menu and the > System Settings.
> You can move the highlight up and down by rotating the SCROLL&SELECT knob to the right and left or by pressing the
arrow buttons p or q on the remote control.
> You can confirm your choice by pressing the SCROLL&SELECT knob or the OK button on the remote control. If a setting
has been changed, it is saved by pressing the SCROLL&SELECT knob or the OK button. If there is an arrow (>) next to a
menu item, additional settings or functions can be accessed by pressing the SCROLL&SELECT knob or the OK button.
> Press the MENU button to exit the menu. Depending on the submenu or option you currently have selected, the MENU
button may have to be pressed repeatedly.
> Should you wish to cancel a setting without saving it, press the MENU button or, alternatively, the BACK (7) button on the
remote control.
The detailed description of the device functions in these instruction manual is given using the buttons on the remote
control.
EN
FR
IT
NL
PL
CZ
SK
19