Pairing; Playing Music - TechniSat DIGITRADIO 143 CD Mode D'emploi

If the DIGITRADIO 143 CD has already been paired with another device which is within range, the connection is
automatically established.

10.2 Pairing

> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the corresponding instruction manual for the devices which
you wish to pair with the DigitRadio.
Please note that only 1 device can be connected to the DIGITRADIO 143 CD at any time.
> Select the list of Bluetooth devices found on your music player.
> In the list, search for the item DIGITRADIO 143 CD and select it. If the selection requires a PIN, enter 0000 (4 x zero).
> If the pairing is completed successfully, the Bluetooth symbol on the DIGITRADIO display stops
flashing.

10.3 Playing music

> Select a music track on your music player and play it.
> The sound is now played via the DIGITRADIO 143 CD.
With the help of the Play buttons on the DigitRadio remote control, you can control the playback on your music player
(only with compatible devices). Alternatively, use the playback controls on your playback device.
Ensure that the volume on your music player is not set too low.
Ensure that you do not exceed the maximum Bluetooth range of 10 metres to guarantee excellent playback quality.
34