Safety Switch; Using The Chopping Blade - Unold 78501 Notice D'utilisation

arrow on the bottom edge of the mixing bowl must be exactly over the circle
mark on the appliance base.
2. Select a utensil and insert it in the mixing bowl. How to correctly insert the
individual utensils is described below.
3. The mixing bowl and the corresponding mixing or cutting utensil must
always be inserted before you put ingredients into the bowl.
4. Place the lid on the mixing bowl. The filling shaft of the lid should initially
be positioned so that the small nose that can be seen beneath the filling
shaft is in front of the guide rail on the appliance base.
5. Now turn the lid clockwise until this nose locks into the appliance base. You
will hear a loud click when this happens. The arrow on the top edge of the
mixing bowl must be exactly under the circle mark on the lid.
6. To remove the lid, hold the mixing bowl with one hand by the handle and
turn the lid counter-clockwise until the nose slips out of the guide rail.
Remove the lid from the appliance.
7. To remove the mixing bowl, turn it in the direction of the arrow to "Open"
until it can be removed from the appliance base by lifting the handle.

SAFETY SWITCH

The appliance is equipped with a safety switch that prevents the appliance from
being operated if it has not been assembled correctly. The appliance can only be
switched on after all parts have been mounted correctly.

USING THE CHOPPING BLADE

For chopping
vegetables, fruits, bread and rolls for making bread crumbs,
meat, chocolate, nuts.
You will get very good results if you first cut the ingredients
into about 1-inch cubes.
Kneading dough
Use butter or margarine at refrigerator temperature and
do not knead the dough excessively long. Before using the
dough after kneading, you should knead it briefly on the
worktop by hand.
Copyright UNOLD AG | www.unold.de
27