Installing The Timing Belt And Sprockets - Yamaha F40BMHD Manuel D'entretien

POWR
b
a
STATOR ASSEMBLY
c
1
INSTALLING THE TIMING BELT AND
SPROCKETS
1. Install:
• Drive sprocket
• Driven sprocket
Driven sprocket bolt
38 Nm (3.8 m
Flywheel magnet assembly holder
YB-06139/90890-06522
2. Install
• Timing belt
Installing steps
(1) Align mark hole
cket with engine centerline.
(2) Align "=" mark
sprocket with a "="
head.
(3) Install the timing belt
(4) Turn the crankshaft clockwise two times
and make sure the drive sprocket and
driven sprocket are correctly aligned
with the marks.
5-18
E
kgf, 28 ft lb)
• •
a
of the drive spro-
b
on the driven
c
on the cylinder
1
.