Télécharger Imprimer la page

Checking Timing Belt; Replacing Fuse - Yamaha F6A Manuel D'utilisation

Masquer les pouces Voir aussi pour F6A:

Publicité

EMU00380

CHECKING TIMING BELT

Inspect the timing-belt and replace it if any
to the following signs is observed:
Cracks in the back of the belt or in the
base of belt teeth.
Excessive wear at the roots of cogs.
Rubber portion swollen by oil.
Belt surfaces roughened.
Signs of wear on edges or outer surface
of belt.
Stretching by 10 mm (0.39 in) or more
when the belt is pushed with a finger.
CAUTION:
@
Consult your Yamaha dealer for replacing
the timing-belt.
@
EMU01315

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse box and replace the
fuse with a spare one of proper amperage,
using a fuse puller.
WARNING
@
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a
fire hazard.
@
NOTE:
@
If the new fuse blows again immediately,
consult a Yamaha dealer.
@
1 Fuse box
2 Fuse (10 A)
3 Spare fuse (10 A)
4 Fuse puller
4-39
GB

Publicité

loading

Ce manuel est également adapté pour:

F6bF6c