Mennekes AMTRON Xtra E Instructions D'installation page 74

Value Description
STA SSID Name of the WLAN the charging
station is connected to.
STA Connected
Status of the WLAN connection.
 true: Charging station is connected
to a WLAN
 false: No connection of the
charging station to a WLAN
STA Security Selecting the WLAN encryption.
Mode Default setting: "Autodetect security
mode"
STA Security Entering the WLAN security key.
Key
AP Security Selecting the WLAN encryption when
Mode charging station is operated in access
point mode.
AP Channel
Selecting the WLAN channel when
charging station is operated in access
point mode.
AP Country Selecting the country code when
Code charging station is operated in access
point mode.
Local Display / enter the current system time
Timestamp of the HC controller in Unix timestamp
format.
Currently Selecting daylight saving time /
Summer
standard time
 Daylight saving time
 Standard time
Timezone Enter the difference between the local
Offset time zone and UTC time in minutes.
SW Reset Software reset
Click on the button "Reset" to restart
the HC controller of the charging
station.
25
Menu "Whitelist Operation"
Only for versions Xtra and Premium.
Fig. 25: Menu "Whitelist Operation"
The menu "Whitelist Operation" allows you to edit
whitelist entries for RFID cards. You can add and delete RFID
cards or edit entries.
For this purpose, the UIDs of the RFID cards must be known,
as the RFID cards already existing in the whitelist are not
shown here.
You can manage the whitelist more conveniently with
the Charge APP.
Adding / editing an RFID card
1. Enter the name required for the RFID card in the field
"Name".
2. Enter the UID of the RFID card in the field "UID".
3. Enter the PIN 2 (whitelist PIN, see set-up data sheet) of
the charging station in the field "PIN".
4. Use the checkbox "Master" to choose if the RFID card
should be created as a master RFID card.
Master RFID cards cannot be used to start charging
processes!
5. Click on the button "Submit" to add or edit an RFID
card.
 The settings applied to the RFID card have been
incorporated into the internal database (whitelist).