_BA_MCS.book Seite 11 Donnerstag, 2. April 2009 9:56 09
MCS5, MCS15
Moisture Mode
While in the On Mode simultaneously press the Power and Down Buttons.
The first cycle will start in one minute.
Press the Power Button to end the Moisture Mode.
The "HU1" mnemonic code is displayed while in the Moisture Mode.
Program Mode
Note
I
The program mode can only be entered from the Off Mode.
The Program Mode is used to adjust the systems operating parameters to
suit the particular needs of individual users. The Program Mode is also used
to tailor the air conditioning system for the most efficient operation within an
installation.
Variables such as ducting, sensor location and system layout affect the
system operation. The Marine Climate System is shipped with factory default
settings which are stored in permanent memory and can be recalled at any
time.
Operating
11