Product Components; Mechanical Installation - Hach 1735 TRO Manuel D'utilisation

Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately. Included but not shown
are the stir bar and user manual. The stir bar is attached to the inside of the lower enclosure.
Figure 2 Product components
1 Instrument
2 Syringe
Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.

Mechanical installation

Attach the instrument to a wall
Personal injury hazard. Make sure that the wall mounting is able to hold 4 times the weight of the
equipment.
Install the instrument on a wall in a vertical position.
• Use 10 mm or 3/8-in. bolts to install the instrument.
• Install the instrument as close as possible to the sample point.
Figure
3 Upper enclosure access tool
4 Stir bar (not shown)
D A N G E R
W A R N I N G
2. If any items are missing or
English 7