Selecting A Scenario - LEGRAND 675 20 Notice D'installation

8 - Operation

8.3 - Selecting a scenario

The division scenarios can be selected with the system switched ON or OFF.
The example shows the selection procedure by means of keypad with user code or with a key
enabled code. An enabled remote control or a transponder key can be used to confirm the
selected scenario.
1 2 3 4 –– –– –– ––
17 / 11 / 08
1 2 3 4 –– –– –– ––
17 / 11 / 08 15 : 49
OK
1 2 3
4 5 6
7 8 9
0
P
Scenario 3
17 / 11 / 08
15 : 51
15 : 53
With the keys select the scenario
required; the operation can also be performed
with system switched ON
Press the key then type the user code or an
enabled numeric code
The Scenario 3 has been activated
143