LEGRAND 675 20 Notice D'installation page 146

8 - Operation
Displayed message
ACTIVE SENSOR
KEY ON
KEY OFF
TAMPTEST ERROR
INSERTION ERROR
ACTIVATION
MAINTENANCE
MEMORY RESET
KEY/CODE
KEY ELIMINATED
ALL KEYS ELIMIN
DATE - HOUR
KEY ENTERED
KEY LEFT
DEAD BATTERY
RADIO SENSOR KO
SENDING CONFIG. NOT
SUCCESSFUL
All individual devices activation and deactivation events performed either from the local keypad
or remotely are also recorded; below is a screen showing the deactivation of an IR sensor.
146
When activating, the sensor is active
Executes act/deactivation toggles (French version)
Executes disconnection
Communication problems between the Unit and devices
Insertion not available
The system has exited from the maintenance
The system is in maintenance mode
The event memory has been deleted
Attempted enabling with unknown code/key
Cancelling a code
Cancelling all the keys (switching ON/ switching OFF only
possible from the control unit keypad)
The date/hour has been updated
Switching OFF performed by ...... (key name)
Switching ON performed by ...... (key name)
Control unit battery dead
A radio sensor is faulty or its battery is flat
After a configuration modification, the Unit did not
manage to send it to the display devices
Event 035
11/11/08 11:37
Intrusion alarm
C1 central
Type of event