Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 - First activation
4.6 - Key program - transponder
Select Key program from the Maintenance menu
Language
Key program
System test
Learning
01:
Key 1
02: Key 2
03: Key 3
New
Key program
Waiting key...
1
2
3
4
5
6
7
8
9
0
P
01:
transponder
02: Key 2
03: Key 3
Disable
Notation on transponder use:
To enable or disable the burglar alarm, press the burglar-alarm unit
transponder key near the reader for about 2 seconds.
Press
to enter
Press
again
Bring the transponder key (less than
one centimeter) near the reader. When
programming is completed, Programming
performed appears on the display.
Whenever the transponder has already been
saved the control unit will return to the list
of keys showing the existing one in case you
want to modify it.
The transponder so programmed will be
recognised by all the system readers
When key programming is completed, hold
down the
pushbutton until the initial page
appears
or
key. Then, bring the
107
Publicité
Chapitres
Table des Matières
