Maintenance (For Installer Only) - LEGRAND 675 20 Notice D'installation

6 - Burglar-alarm menu
Scenarios
Zones

6.8 - Maintenance (for installer only)

Access to this menu is only possible using the maintenance Code (base 00000).
Use the vertical scroll keys
- option for the display language and vocal messages;
Language
enter by pressing
- lets you program the remote controls and transponders for enabling and
Key program
disabling the burglar alarm.
Use the keys
•
•
•
•
•
•
- select this function and press
System test
mode. This allows the installer to check all systems without activating
the system. When this function is selected the Control unit can receive
telephone calls.
- This function makes the burglar-alarm unit recognize all peripheral
Learning
devices included in the burglar alarm system, hence identifying its
classification (IR sensor, internal siren... etc.) and assigned zone.
2 options are available:
Automatic: the unit scans the system and configures every single
peripheral device (for this procedure, see par. 4.2).
Manual: allows you to check the connection, type and situation of the
tamper of each device, hence storing them.
Devices
Event memory
Language
Key program
System test
Learning
to select one of the following required functions:
.
to select one of the following options:
New: for programming new remote controls and transponders.
Share: for programming a remote control to be used for several burglar
alarms (e.g. home and office)
Update: for the configuration of a remote control, the code of which you
believe has been copied
Select: can associate some limitations of use to the remote control/
transponder.
Erase: to cancel the selected remote control or transponder.
Erase all: used for erasing of all codes; and to execute programming (for
programming, go to par. 4.6).
Date and hour Automations
to enter; the system switches to TEST
Settings
125