Devices - LEGRAND 675 20 Notice D'installation

6 - Burglar-alarm menu
Scenarios
Zones

6.3 - Devices

The Devices menu gives information on each component included in the burglar-alarm system.
It gives information on the assigned zone, progressive number of the peripheral device within
the zone, type (IR sensor, internal siren...etc.), name, status (enabled or disabled) and, for zone 1
peripheral devices only, the delay on activation.
Zone (e.g. 1) and
number of the
peripheral device (e.g. 1)
Active zones
Delay on activation
Functions
Use the vertical scroll keys
Use the horizontal scroll keys
- activates the selected peripheral device; enter activation by pressing
Activate
- deactivates the selected peripheral device; all peripheral devices are
Deactivate
enabled after the first activation; enter deactivation by pressing
Disabling one or more peripheral devices may jeopardize the burglar-
alarm safety. For this reason, a check page is displayed in order to avoid
unintentional deactivations.
Disabling a mechanical key and the devices assigned to zone 0 causes
their functions to be lost except for the connectors, which continue to
operate.
Note: Disabling is referred to the burglar-alarm functions and 24-hour
functions.
- if a device is configured as delayable, the Control unit proposes enabling
Delay ON
the input delay.
This function gives the possibility to delay the input alarm activation for
each sensor; (program the delay duration in the Settings menu, sec. 6.8);
enter by pressing
- no delay: if an event is recorded, the sensor will immediately activate the
Delay OFF
alarm; enter by pressing
Date and hour Automations
Event memory
01: IR sensor
02: Entrance
Entry del. OFF
Deactivate
to select the peripheral device.
to select one of the following required functions:
.
.
Settings Maintenance
Type of peripheral devi-
ce (e.g. IR sensor)
Name that can be edited
(via software)
.
119
.