LEGRAND 675 20 Notice D'installation page 94

2 - Description of the Burglar-alarm unit
• A set division can be linked to each key; also use of the key can be limited to set days of the
week and with a precise time range.
• Lets the user carry out any automation in case of an event recorded by the burglar-alarm system
(e.g. turning the lights ON in a tampering alarm zone).
• All editing steps are guided and shown through the display.
Telephone dialling device
Provides bi-directional communication between the user and the home automation My Home
Legrand:
• In case of alarm detected by the burglar alarm, it will automatically dial the telephone numbers
previously programmed by the user and will notify the type of event occurred through a vocal
message.
• It can be called by the user who can send commands to the automation system and burglar-
alarm system through predefined codes.
• It allows you to know - by telephone - the status of the burglar-alarm and automation
system.
• It allows automatically sending the alarm and event signals to surveillance control units which
use the Contact ID protocol and requesting and setting its parameters.
94