Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8 - Operation
8.6 - Semplifi ed 99 codes
The simplified Code allows the user to send a telephone command to the Unit (among those
stored and included in section 7.6) with an easy and quick procedure that does not require typing
in the "Open Web Net" code.
The simplified 99 Code Commands can be used with the following functions:
• LIGHTING • CONTROL UNIT • AUXILIARIES • TEMPERATURE CONTROL • ALARMS
The structure of the simplified Code is the following:
The number related to the COMMAND TYPE should be represented as follows:
1: executes the command corresponding to the set Open code (ON, OFF, etc.);
0: always executes an OFF or DOWN command on the device indicated by the Open code.
FUNCTIONS
LIGHTING
CONTROL UNIT
AUXILIARIES
THERMO
ALARMS
By using the simplified 99 Code Commands, it is possible – for each stored Open Web Net Code
– to execute two different actions (e.g. ON/OFF – UP/DOWN).
Example:
If Command 1 corresponds to the Open Web Net Code *1*1*2## (ON, entrance lights) by typing
the SIMPLIFIED CODE:
All stored telephone commands will get a vocal message answer from the Unit, for example:
"command executed" or "wrong code". For the first 4 commands, it will also be possible to listen
to a message recorded.
148
BASIC CODE + TYPE OF COMMAND + TELEPHONE COMMAND No.
BASIC
CODE
99
9911 - the Unit will execute ON
9901 - the Unit will execute OFF
TYPE OF
COMMAND
COMMAND
DESCRIPTION
1
Command Open
0
Command OFF
1
Command Open
0
Command DOWN
1
Command Open
0
Command OFF
1
Command Open
0
Command Open
1
Command Open
0
Command Open
TELEPHONE
COMMAND No.
1
9
from
to
Publicité
Chapitres
Table des Matières
