Learning - LEGRAND 675 20 Notice D'installation

4 - First activation

4.2 - Learning

This function makes the burglar-alarm unit recognize all devices included in the burglar-alarm
system, hence identifying its classification (IR sensor, internal siren... etc.) and assigned zone. The
configuration is stored by the Unit and can be edited according to the current requirements.
Language
Key program
System test
Learning
Language
Key program
System test
Learning
Z : 0
AI device
t a m p :
automatic
Learning
ended
No problem
NEXT
N : 1
O F F
Select Learning
Press to enter
After pressing , the display looks like the
figure opposite
Press to start the learning function
At the end, this message will appear:
Learning
ended
No problem
(instead, if the message "tamper problem"
appears, press , press
arrow go to the manual configuration and
check the device showing "tamp: ON" with the
down arrow. Eliminate the problem and repeat
the automatic learning function)
and, with the side
101