Set Calls - LEGRAND 675 20 Notice D'installation

7 - Dialling device menu
Jolly number

7.3 - Set calls

This menu lets you match the telephone numbers stored in the index book with the alarm events
detectable by the burglar alarm or any Open event chosen by the user; it is possible to match
up to 4 telephone numbers with each event (in addition to the jolly number, which is common
to all events).
There are three types of events (see diagram below)
The plant alarm event and the plant failure event are those detected by the burglar alarm;
technical events are established by the user. In this case, after matching the telephone numbers
you intend to call, the Open code related to the event that will make the call will be requested
(e.g. *5*12*#1## = activation of the gas detector – see par. 9).
Technical events include remote assistance which only works on auxiliary channel 9.
When one of the above events occurs, the burglar-alarm unit automatically dials the telephone
numbers matched with one specific event and communicates the type of alarm that has occurred
through a vocal message (see par. 7.4).
If the line is busy or if there is no answer, the Unit keeps calling for the set number of times (see
par. 7.5); the user who receives the call can stop the cycle of calls by dialling the user code (basic
00000) on his/her own telephone after listening to the recorded message. If the user code is not
dialled, the Unit will keep on dialling the set telephone numbers that did not answer.
130
Index book
ALARM
Tel. Functions Tel. commands
Vocal Messages
TYPE OF EVENT
plant alarm
plant failure
technical 1–4
CAUSE
intrusion
antipanic
silent
tampering
supply lack
battery
event Open1
event Open2
event Open3
event Open4