4 - Switching on for the first time
When the Control Unit is switched on for the first time it shows the Maintenance menu with the
Language function highlighted.
To activate the Control Unit and make it operational:
•
Select the
•
Perform the zone learning -
•
Configure the zone
•
Configure the zone
•
Enter time and date.
•
Define the system state (Summer/winter).
4.1 - Selecting the language
Use this function if the language preset in the factory is not that required:
Configure zones
92
Language.
Actuators.
Pumps.
Language
Probe setting
System test
Français
English
Español
Português
Français
English
Español
Português
Zone search.
Select Language
Confirm by pressing
Select the language required
Confirm by pressing