System Test - LEGRAND 674 56 Notice D'installation

6 - Main menu
Mode Mode Zone state Zone state
6.8.3 - Probe setting
Can align the temperature measured by the probes to a value measured with other devices
(thermometer,...) to guarantee better precision in system operation.
Language
Configure zones
Probe setting

System test

Zone 1
Zone 2
Zone 3
Measured:
20.0C
New:
22.5C
Probe setting
in progress . . .
Zone 1
Zone 2
Zone 3
Current profiles Current profiles Programming Programming
Select Probe setting
Confirm by pressing
Select the zone (e.g.: Zone 2)
Press
Set the effective temperature measured in the
room (± 0.1 °C increment)
Press
Press
pressed to return to the first page
Setup Setup
to confirm
to confirm
to return to the previous page; keep
Maintenance Maintenance Maintenance Maintenance
157