LEGRAND 674 56 Notice D'installation page 141

6 - Main menu
Mode Zone state
6.5.7 - Diagnostic
If there is a fault in one or more of the system zones it can check the devices installed in the
individual zones.
Remote control
User code
Contrast
Diagnostic
Diagnostic
update . . .
01: Zone 1
02: Zone 2
03: Zone 3
Visualize
Visualize
Update
Use the keys to select the function required.
If Climaveneta Chillers are detected during the diagnostic phase, "CHILLER DIAGN." will appear,
thus making it possible to verify their status.
The " ! " symbol identifies the zone where there are running problems.
Current profiles Programming
Select Diagnostic
Press
The control unit automatically updates the
system diagnostic state
Select the zone
The following functions are available for the zone
selected:
Can visualize the state of the zone selected
Can question the probe of the zone selected
Setup Setup
to confirm
Maintenance
141