Configuring The Pumps - LEGRAND 674 56 Notice D'installation

4 - Switching on for the first time

4.4 - Configuring the pumps

Can complete the zone configuration, indicating which pumps must control the zone and with
how much delay.
01:
02:
03:
01:
02:
03:
Not connected
Not connected
09:
H:
C:
96
This function can only be used if the probe is configured with the CEN configurator in
socket P.
Living room
Zone 2
Zone 3
Pumps
Heating
Heating
Cooling
Heating
Cooling
Heat. & cool.
Not connected
1
0
0
NEXT
Select the Zone (e.g.: Living room)
Confirm by pressing
One of the following options can be selected
for each actuator in the list:
Not present on the system or not managed by the zone
selected
Is used to manage the Heating system
Is used to manage the Cooling system
Is used to manage both the Heating system and the Cooling
system
Confirm by pressing
The last two items of the menu can select the
delay in activating the pump
Selects the minutes of delay
Press to confirm